AMX DXFP-TX-4K60 · Audio XL

The DXFP-TX-4K60 can be used to transmit high-resolution video, audio, control and Ethernet over fiber optic cable multimode duplex OM3 up to 300m, over fiber optic cable multimode duplex OM4 up to 550m and singlemode up to 10km to a DGX router with fiber optic inputs, or point-to-point to a fiber optic receiver.

The compact transmitter can be mounted under a table or in a desk. Source control is via the built-in RS-232, the IR port, TCP/IP or USB2.0. Source feedback signals can be evaluated for monitoring the settings of the connected devices.

Analog audio signals can be input separately via the stereo audio input. At an HDMI output, the signal fed in can be tapped unchanged with a fellow foam monitor.

Technical Data

Connections Video: 2x HDMI 2.0 type A jack with mounting thread hole, 1x input, 1x output of which
Support for maximum resolution: 3840x2160@60 Hz 4:4:4, 3840x2160p@50/60 Hz 4:2:0, 4096x2160p@50/60 Hz 4:2:0, as well as HDR10 (High Data Rate) 36-bit Deep Color
Output: SFP cage for use with SFP module multimode or singlemode duplex, multimode up to 300 m OM3 or 550 m OM4 cable path to router or receiver for point-to-point operation.
No interruption when switching HDCP protected picture content due to InstaGate Pro technology.
Audio formats digital: Dolby TrueHD, Dolby Digital*, DTS-HD Master Audio, DTS*, 2 CH L-PCM, 6 CH L-PCM, 8 CH L-PCM (* = Dolby Digital and DTS is supported up to 48 kHz, 5.1 channel); audio resolution 16 to 24 bit, audio sample rates: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
Audio input: 1x 3.5 mm stereo jack, stereo analog, +3 dBu unbalanced, impedance 10 k ohms
Control connections: 1x 3-pin 3.5 mm Phoenix connector for RS-232 bidirectional for serial control of connected devices.
1x RJ-45 female connector for TCP/IP (10/100), for connection of TCP/IP control modules and operator panels, for control of connected devices via TCP/IP and for connection of PC or laptop via Ethernet.
1x 2-pin 3.5 mm Phoenix connector for infrared signal output for controlling the connected devices with IR by means of IR transmitter diode.
1x USB 2.0 socket type A, for connection of devices with High Speed USB 2.0
Power supply locally via external 12VDC 1.5 A power supply (included) to 2.1 mm hollow connector socket.