AMX DXFP-RX-4K60 · Audio XL

The DXFP-RX-4K60 can receive high-definition video, audio, control, and Ethernet over fiber optic cable multimode duplex OM3 up to 300m, over fiber optic cable multimode duplex OM4 up to 550m, and up to 10km singlemode duplex from a DGX router with fiber optic outputs, or point-to-point from a fiber optic transmitter.

The compact receiver can be mounted behind a display or above a projector. The sink is controlled via the built-in RS-232, the IR port, TCP/IP or USB2.0. Feedback from the sinks on control signals can be evaluated to monitor the settings of the connected playback devices.

Analog audio signals can be played out separately via the stereo audio output.

Technical Data

Output video: 1x HDMI 2.0 type A jack with mounting thread hole
Support for maximum resolution: 3840x2160@60 Hz 4:4:4, 3840x2160p@50/60 Hz 4:2:0, 4096x2160p@50/60 Hz 4:2:0, and HDR10 (High Data Rate) 36-bit Deep Color
Input: SFP cage for use with SFP module multimode or singlemode duplex, up to 550m or 10km cable path from router or transmitter in point-to-point operation.
No interruption when switching HDCP protected picture content due to InstaGate Pro technology.
Audio formats digital: Dolby TrueHD, Dolby Digital*, DTS-HD Master Audio, DTS*, 2 CH L-PCM, 6 CH L-PCM, 8 CH L-PCM (* = Dolby Digital and DTS is supported up to 48 kHz, 5.1 channel); audio resolution 16 to 24 bit, audio sample rates: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
Audio output: 1x 3.5 mm stereo jack, stereo analog, +3 dBu unbalanced, impedance 10 k ohms
Control connections: 1x 3-pin 3.5 mm Phoenix connector for RS-232 bidirectional for serial control of connected devices.
1x RJ-45 female connector for TCP/IP (10/100), for connection of TCP/IP control modules and operator panels, for control of connected devices via TCP/IP and for connection of PC or laptop via Ethernet.
1x 2-pin 3.5mm Phoenix connector for infrared signal output for controlling the connected devices with IR by means of IR transmitting diode.
1x USB 2.0 socket type A, for connection of devices with High Speed USB 2.0
Power supply locally via external 12 VDC 1.5 A power supply (included in delivery) to 2.1 mm hollow connector socket.