AMX Enova DVX-2265-4K

The AMX Enova DVX-2265-4K is a All-In-One Presentation Switcher for AV distribution and control in educational facilities, conference, seminar and meeting rooms. It offers multiple functions in one device: media switcher, controller with control interfaces, video scaler, twisted pair signal transmission, audio DSP and amplifier.

Thanks to the 2 HDBaseT inputs, two high-resolution signal sources up to 100 m away can be processed simultaneously, even from several rooms.

A wide variety of sources can be connected to the DVX-2265-4K. The HDMI inputs support digital HDMI 2.0 sources with HDCP 2.2 and allow free assignment of video and audio signals to any output.

Audio signals can be separated from the video signal and processed in independently switched 4 audio paths. The built-in digital signal processor offers various functions for adjusting the sound to the respective room acoustics or for audio/video conferencing.

The audio signals can be tapped as stereo line, or amplified. A DANTE/AES67 interface is also available.

A twisted pair transmitter is built in for the transmission of AV signals and control commands over long cable runs.

To ensure that content is displayed at the best possible resolution on any display, the DVX-2265-4K has automatic image scaling on all outputs.

Technical Data

Video inputs: 4x HDMI 2.0 Type A jack with mounting thread hole (supports HDCP 2.2), 2x DXLink. Sources with HDBaseT output can also be connected directly without DXLink transmitter.
Video outputs: 2x HDMI 2.0 Type A female with mounting thread hole (supports HDCP 2.2), 1x DXLink; mirroring of associated HDMI output; supports digital video, audio, Ethernet and bidirectional control. A sink with HDBaseT input can also be connected directly without DXLink receiver.
Support for maximum resolution: 3840x2160@60 Hz 4:4:4, 3840x2160p@50/60 Hz 4:2:0, 4096x2160p@50/60 Hz 4:2:0, and HDR10 (High Data Rate) 36-bit Deep Color.
Smart Scale of all outputs, for automatic and independent adjustment of the output resolution to the native resolution of the respective connected sink.
All DXLink connectors with power supply for the connected transmitters and receivers.
Audio inputs: 6x 3.5 mm 3-pin wire terminal MIC/line connectors; 2x 3.5 mm 5-pin wire terminal MIC/line connectors, 4x HDMI connectors with embedded audio, 2x DXLink connectors with embedded audio
Integrated BSS DSP with mixer, 5 and 10 band parametric equalizer, independent adjustment of gain and compression for each input.
Audio outputs: 2x 3.5mm 5-pin wire terminal line-level, 1x 3.5mm 4-pin wire terminal amplified stereo audio output 120W per channel, 1x 3.5mm 3-pin wire terminal audio output 100/70V, 2x HDMI connectors with embedded audio, 1x DXLink output with embedded audio.
DANTE/AES67 interface: 2x RJ45 ports, primary and secondary, 8 channels input/output each
RS-232 ports: 2x 3.5 mm 3-pin wire terminal, 300 - 115,200 baud
IR/Serial: 1x 3.5 mm 4-pin wire terminal, 2x IR Transmit / 2x 1-way serial port, support of high frequency carriers up to 1.142 MHz, 2 IR/Serial data signals can be generated simultaneously
I/O contacts: 1x 3.5mm 4-pin wire terminal, 2-channel binary I/O port to close contacts, each input is voltage scannable.
Relay: 1x 3.5mm 4-pin wire terminal, 2 floating relay contacts. Each relay can switch up to 24 VDC or 28 VAC @ 1 A, independently controlled.
USB 2.0: 3x ports mini-USB, each assigned to a DXLink input or output.
Network: 1x RJ45 LAN 100/1000 for integration into the house network. 1x RJ45 ICSLAN for connection of touch panels, key panels and remote EXB boxes with control interfaces, incl. automatic device detection and configuration. All endpoints in a private network, 1 IP address for the DVX and all endpoints.
HTML5 web interface for configuration, setup and diagnostics.
Front panel with LCD display for manual operation, setting and configuration.
Dimensions: 19'', 2 U