Kit consisting of transmitter and receiver for switching between 2x HDMI and 1x VGA/stereo audio and transmitting the signal over up to 35m twisted pair cable
Integrated scaler for output resolutions up to 4K60, HDCP1.4 and 2.2
Additional HDMI input on the receiver to feed in another HDMI signal
Control of the transmitter via RS232, control signal transmission to the receiver via CAT
Control of a connected display via RS232, TCP/IP or relay
Output stereo audio analog
The CTP-1301 is a set of multi-format switch with integrated HDBaseT transmitter and a HDBaseT receiver. It offers a simple solution to switch up to three sources and transmit them via twisted pair. At the receiver the signal is converted back to HDMI with the possibility to connect another HDMI signal.
Analog stereo audio is decoupled at the receiver and can be output through speakers or a soundbar.
Source selection can be manual, automatic or serially controlled at the transmitter and receiver. An RS232 and a TCP/IP interface, or two relay contacts in the receiver can be used to control the sink.
Power can be supplied to the transmitter via HDBaseT from the receiver.
