AMX NMX-ENC-N2412A - Video Over IP Encoder

The NMX-ENC-N2412A is an encoder that distributes video at resolutions up to 4K60 4:4:4 with low latency over Gigabit Ethernet networks. JPEG2000 encoding renders cinema-quality video with only 2 frames of latency.

In addition, HDMI 2.0 and HDCP 2.2 interfaces are supported. In addition, the encoder is now compatible with more 4K sources and displays.

The NMX-ENC-N2412A uses the same program interfaces, web interfaces and software as AMX's existing Networked AV products.

4K60 is best suited for high-resolution, large-scale video transmission. AMX N2400 Series units are perfect for lecture halls, learning spaces, and anywhere viewers expect perfect picture quality.

Technical Data

Connections and formats Video: HDMI and DVI-D progressive (DVI-D via adapter), connect via HDMI jack
Processed resolutions: Pixel Clock between 27 MHz and 600 MHz, minimum resolution 720x480p60, maximum horizontal resolution 4096 or vertical 2160, color space 4:4:4 for all resolutions and frame rates up to and including 60Hz.
HDMI and DVI-D interlaced, connection via HDMI socket: 1920x1080@50Hz (1080i50), 1920x1080@60Hz (1080i60)
Analog signals: VGA/RGBHV and component video via 15pin HD jack, analog to digital conversion 8-bit 300 MHz for each of the three color channels
All resolutions @60Hz also support @59.94Hz.
Resolutions Video output format local: HDMI, corresponding to HDMI, or VGA input format, not amplified
Audio connections and formats: Embedded audio via HDMI input (DVI-D via adapter), HDMI audio format: 8-channel PCM, analog stereo audio, balanced or unbalanced, input via 5-pin Phoenix connector, analog-to-digital conversion: 16bit - 48 kHz
Output via Ethernet connector, optional generation of AES67 audio and sending to appropriate devices for further processing
At loop-through output embedded in HDMI or DVI-D if video signal is present
Rear communication interfaces:
Ethernet: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, auto-IP, static IP
Port P0: Connector RJ45 jack, 8-wire, 10/100/1000Base-T autosensing Gigabit Ethernet switch port for network connection, network audio/video, PoE port according to IEEE802.3at
Port P1: connector SFP female to connect SFP fiber transceiver, or directly connect SFP network cable (fiber or copper) for network connection
IR: 2pin Phoenix header for IR cable emitter to send IR control codes (33-60 KHz, typically 39 KHz)
RS232: 3pin Phoenix header, bidirectional, adjustable baud rates 9600-115200
Audio: 5pin Phoenix header, balanced or unbalanced at choice, audio signal connection independent from video
HDMI input: HDMI socket, can also be used for DVI-D and DisplayPort++ via adapter; HDCP2.2 compliant, with EDID management
HDMI output: HDMI socket, can also be used for DVI-D and DisplayPort++ via adapter; HDCP2.2 compliant, with EDID management
VGA input: 15pin HD socket, also usable for component video YPbPr; with EDID management
Front panel equipment:
2 USB-A ports for KVM function; to connect a PC to operate it from the decoder with keyboard/mouse.
Reset button to trigger a "warm" reboot that resets the processor but does not cut power; current settings are not affected. The button is recessed in the case to prevent accidental actuation.
ID key for sending a login signal to the network to identify the device; triggers a pop-up dialog in N-Able and N-Command. The button is recessed in the housing to preclude accidental actuation.
Power supply:
PoE+ (Power-over-Ethernet) via a PoE switch or a PoE injector according to IEEE802.3at Class 4 (802.3at Type 2), via optional external power supply 12VDC/3.0A, connection via 2-pin connector strip.

Documents

Matching Products

AMX NMX-WP-N2410

4x1 video picture-in-picture processor for 4K60 4.4:4 streams, compatible with SVSI N2400.

AMX NMX-ENC-N2412A - JPEG 2000 4K60 4:4:4 UHD Video over IP Encoder

Technical Data

Documents

Optional Accessories

AMX NMX-ACC-N9313

AMX NMX-ACC-N9101

AMX NMX-ACC-N9102

Matching Products

AMX NMX-WP-N2410