AMX Enova DGX800/1600-ASB

The DGX800/1600-ASB plug-in cards are suitable for the AMX Enova DGX800 and DGX1600 router systems. Each card has 8 connectors for stereo unbalanced analog audio signals. The DGX800 and DGX1600 housings each have one slot available on the input side and one on the output side.

The cards allow audio sources with analog outputs to be connected directly to an Enova DGX router. Embedded audio signals from the HDMI inputs or outputs can be filtered out, processed with DSP functionalities and passed to a separate sound system.

A test tone generator is integrated for easier adjustment of the DSP values.

Technical Data

2 cards to build a 16 x 16 (with DGX800) or 24 x 24 (with DGX1600) audio router
Audio inputs: 4 blocks of 10 Phoenix screw terminals 3.5mm each for balanced or unbalanced stereo audio, up to 8 inputs embedded in video input signals with the DGX800, or up to 16 inputs embedded in video input signals with the DGX1600.
Input level (nominal): +4 dBu balanced or -10 dBV unbalanced
Input level max: +14 dBu
Input impedance: >17 kOhm balanced, >10 kOhm unbalanced
Crosstalk balanced: -98 dB @ 0 dBV, 20 Hz to 20 kHz
Crosstalk unbalanced: -70 dB @ 0 dBV, 20 Hz to 20 kHz
Audio outputs: 4 blocks of 10 Phoenix screw terminals 3.5 mm each for balanced or unbalanced stereo audio, up to 32 outputs embedded in video output signals
Output level (max.): +17 dBu
Output impedance: 200 ohms (line level)
Frequency response: ? 0.1 dB, 20 Hz to 20 kHz
THD + N: 0.003%, @ 0 dBV, 1 kHz
Signal to noise ratio: 105 dB @ 10 dBV, AES17
DSP functionalities Inputs: Input compression independent for each input, Attack 1 to 2000 ms, Release 10 to 5000 ms, Ratio 1 to 20, Treshold -60 to 0 dB
DSP functionalities Outputs: 10-band parametric equalizer with adjustable center frequency, filter type and Q per band, center frequency 20 Hz to 20 kHz, EQ gain -12 to +12 dB, Q 0.1 to 20, filter types: Bell, Bass Shelving, Treble Shelving, Low Pass, High Pass, Band Pass, Band Stop. Sync Delay 0 to 200 ms, Balance control 20 steps each right and left. Independent adjustment of EQ, volume and balance for each output.
Test tone generator: type individually selectable and available at all outputs simultaneously, can be switched on and off at each output individually, 60 Hz, 250 Hz, 400 Hz, 1 kHz, 3 kHz, 5 kHz, 10 kHz, Pink Noise, White Noise