Audio Pro XL Logo

JBL COL 800 BK - Passive column speaker, 80 cm NEW

JBL COL 800 BK
Logo JBL

Slim, compact design with low cabinet depth of 9.4 cm

High output with max. 116 dB SPL (110 dB continuous sound pressure)

Optimal coverage of most listening areas due to a wide horizontal and a smaller vertical coverage angle of 160° x 60°

Built-in -10° chassis tilt allows for near-wall installation without having to tilt the enclosure downward

Multi-tap transformers for 70/100 volt and 8 ohm operation

IP54 certified (to IEC60529) for indoor and outdoor use

Mounting brackets and cover included to protect input terminals

JBL COL 800 BK
JBL COL 800 BK
JBL COL 800 BK
JBL COL 800 BK
JBL COL 800 BK

The JBL COL800 is a passive column speaker with a length of 80 cm and a cabinet depth of only 9.4 cm. It has a wide horizontal and a small vertical dispersion of 160° x 60°. Larger areas can thus be covered evenly.

Due to its compact design, the JBL COL800 takes up little space and can be easily integrated virtually anywhere. According to IP54 (IEC60529), the speaker is protected against the ingress of dust and water and can be installed both indoors and outdoors. This makes it suitable as a space-saving sound reinforcement solution for meeting rooms, lecture halls, retail stores, restaurants, museums, foyers, etc....

The JBL COL800 is equipped with two 0.8" tweeters and four 5 "x2.25" woofers. The elongated shape of the woofers increases the diaphragm surface area, resulting in higher sound quality and improved bass response. For optimal coverage of the listening area, the tweeter is located at the top of the cabinet. With a frequency range of 85 Hz to 20 kHz, the column speaker delivers excellent music reproduction and speech intelligibility.

The drivers are mounted with a -10° tilt angle. This allows the JBL COL800 to be installed close to the wall without having to tilt the cabinet down. For exact alignment, additional two L-brackets are already included as well as a swivel and tilt wall mount.

A switchable multi-tap transformer is integrated for 70/100 volt and low impedance 8 ohm operation.


Technical Data


Documents