Set of HDBaseT built-in transmitter for 2 HDMI sources and USB-C input, receiver and remote keypad
Connections for up to 3 audio/video sources up to 4K@60Hz
Switching automatic, manual, or externally controllable
KVM functionality with 1x USB host and 2x USB device
Built-in keypad with rotary knob can be set up to 30m away
Integrated web GUI; software tool for central configuration and control of all sets in the network
The JPK-1300-EK is a set of signal connector panel with HDBaseT transmitter, a receiver and a button panel that connects to the transmitter. 2 HDMI sources with resolutions up to 4K@60Hz 4:2:0, a USB-2.0 signal via USB-C and a PC as USB host can be connected to the transmitter. The button can be used to select the signal source. The receiver receives the signal over up to 70m of shielded CAT6/6a/7 cable uncompressed at resolutions up to 1080p or up to 40m at 4K. A USB device port, an analog audio input for line or microphone and two audio outputs are available as line-out and as 2x 25W into 4 Ohm/8 Ohm speakers.
The sink can be controlled via RS232 or IR, potential-free relay contacts can be used for switching functions or for muting the audio signal. The receiver itself can be configured and controlled via an Ethernet interface.
The key control panel can be connected to the transmitter remotely via CAT cable. It has 6 keys for source selection and display control and a rotary knob for volume control.
