HDBaseT 2.0 receiver for Xtend-TX100 transmitter, HDCP 2.2 compliant
Receives HDMI, audio and control signals over up to 100m CAT 5e/6/6a/7 cable, resolutions up to 4K@60Hz 4:2:0
4 ports USB 2.0 device for KVM, 1x RS232 bidirectional
2 analog audio outputs, 1x decoupling from HDMI signal, 1x pass-through from transmitter
Power supply with universal power supply included, also for power supply of the transmitter
The Xtend-RX100 is a HDBaseT 2.0 receiver, HDCP 2.2 compliant, for receiving HDMI, audio and control signals over up to 100m CAT 5e/6/6a/7 cable, with resolutions up to 4K@60Hz 4:2:0, for use with the Xtend-TX100 transmitter. It has HDMI 1.4 output, 4x ports USB 2.0 device for KVM, 1x RS232 bidirectional to control the source on the transmitter, to control the signal switching on the Xtend-TX100 or to control the connected sink.
Audio signals are received in HDMI embedded according to HDMI 2.0 specifications, an analog stereo signal is decoupled from the HDMI signal or an analog signal fed separately at the transmitter is output.
Power is supplied with a universal power supply included, and can also supply the connected transmitter.
