dbx ZonePRO 640 - Audio matrix with 6x inputs, 4x outputs and 2x mic/line inputs

dbx ZonePRO 640

Advanced Feedback Suppression (AFS)

Autowarmth

Auto Gain Control

classic dbx compression

Limiter

Recommended retail price

1.031,- EUR

dbx 640

dbx 640

The dbx ZonePRO 640 is a universal problem solution for flexible sound reinforcement concepts in the installation area. Whether restaurant, congress rooms, indoor or outdoor sound reinforcement - with its extensive equipment, the ebx ZonePRO 640 is a professional tool that effortlessly meets all your requirements.

In combination with different wall-mounted panels - for external control of level, signal and program - it supports a demand-oriented and user-friendly installation. In addition, access via the serial interface, offers you elegant solutions with media controls and controllers.

The included software then makes configuring the dbx ZonePRO a breeze. And for all inputs and outputs, there's still plenty of processor power for EQ, routing, dynamics and delay.

The dbx ZonePRO 641 is the "black box" version of the ZonePRO 640 without controls.

Technical Data

No Info Specs

Documents

Optional Accessories

dbx ZC-1

dbx ZC-1

Programmable volume controller for DriveRack 260 and ZonePro devices. A CAT5 cable with RJ-45 connector is sufficient for the connection.

dbx ZC-2

dbx ZC-2

Programmable volume and mute controller for DriveRack 260 and ZonePro devices. A CAT5 cable with RJ-45 connector is all that is needed for the connection.

dbx ZC-3

dbx ZC-3

4-way program selector switch for the DriveRack 260 and ZonePro devices. A CAT5 cable with RJ-45 connector is sufficient for the connection.

dbx ZC-6

dbx ZC-6

UP / Down function for volume etc. of the ZonePro series. The connection is made via CAT5 cable with RJ-45 connector.

dbx ZC-7

dbx ZC-7

Wall panel with 4 buttons to control e.g. announcement / paging function of the ZonePro series. The connection is made via CAT5 cable with RJ-45 connector.

dbx ZC-8

dbx ZC-8

4-way switcher with volume-up-down for simultaneous source selection and volume control. The connection is made via CAT5 cable with RJ-45 connector.

dbx ZC-9

dbx ZC-9

8-fold source selection - can only be used for ZP 1260/1261, as only here 8 sources can be selected.

dbx ZC-4

dbx ZC-4

With the ZC-4, closing contacts allow the change of presets such as sources/scenes. The controller is connected via CAT5 cable with RJ-45 connector.

dbx ZC-BOB

dbx ZC-BOB

Passive 6-way break-out box for all ZC panels. The connection is made via CAT5 cable with RJ-45 connector.

dbx ZC-FIRE

dbx ZC-FIRE

Fire contact control panel (closing contact or control voltage). The connection is made via CAT5 cable with RJ-45 connector.