AMX NMX-ENC-N2315-WP-BL- 4K UHD Video Over IP Encoder

The AMX NMX-ENC-N2315-WP is an encoder for easy installation in the wall, in the floor, a table or in a lectern. Power is supplied directly via an Ethernet cable.

With only 1 frame of latency for encoding (34 ms for 4K30 and 17 ms for 1080p60), the AMX NMX-ENC-N2315-WP provides video distribution with nearly imperceptible latency. HDMI 2.0 and HDCP 2.2 support make it compatible with all current 4K sources and displays.

Each source can be sent to one or more sinks by routing it through Layer 3 switches using standard Cat5e cable.

Technical Data

HDMI and DVI-D progressive (DVI-D and DisplayPort DP++ via passive adapters), connection via HDMI jack:
Processed resolutions: Pixel Clock between 27 MHz and 300 MHz, minimum resolution 720x480p60, maximum horizontal resolution 4096 or vertical 2160, color space 4:2:0 for 4K30 resolutions, 4:2:2 for HD resolutions, HDCP2.2 compliant, with EDID management
HDMI and DVI-D interlaced, connection via HDMI socket: 1920x1080@50Hz (1080i50), 1920x1080@60Hz (1080i60)
Analog signals: VGA/RGBHV and component video via HD-15 jack also usable for component video YPbPr; with EDID management, analog to digital conversion 8-bit 165 MHz for each of the three color channels
All resolutions @60Hz also support @59.94Hz.
Connections and formats audio: embedded audio on HDMI input (DVI-D via adapter), HDMI audio format: 8-channel PCM, analog stereo audio 2-channel, stereo mini-jack, output via Ethernet connector, analog to digital conversion: 16-bit 48 kHz
Rear communication interface: Ethernet: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, auto-IP, static IP
HDMI input: HDMI socket, via adapter also usable for DVI-D and
VGA input: DB15 socket, can also be used for component video YPbPr; with EDID management
USB-B port for connecting keyboard or mouse to operate the locally connected PC
Reset button to trigger a "warm" reboot that resets the processor but does not cut power (can be covered by a bezel). Current settings are not affected by this.
ID button (can be covered by a bezel) to send a login signal to the network to identify the device; triggers a pop-up dialog in N-Able and N-Command.
Power supply: PoE (Power-over-Ethernet) via a PoE switch or a PoE injector according to IEEE802.3af Class 3 (802.3at Type 1)

Documents

Variants

AMX NMX-ENC-N2315-WP-WH

Encoder, 4K UHD Video Over IP, KVM, PoE, wall/flush mount enclosure. The 1 frame latency in encoding ensures almost latency-free video distribution.

AMX NMX-ENC-N2315-WP-BL - 4K UHD Video Over IP Encoder for Wall Mounting

Technical Data

Documents

Variants

AMX NMX-ENC-N2315-WP-WH